Solar water heaters and Schedule 40 iron solar panels installed vertically (standing) for extreme climatic conditions (frost)
As a leading factory in Israel, Nimrod offers its customers a large variety of water heating options and smart installation solutions tailored to every home / business and need.
A thermosyphonic system (solar water heater) operates by heating water in an open system and is considered the most common system in Israel. It can be installed on a flat or tiled roof or a combination of the two. In this system, the water tank is installed above the solar collector, which may be less aesthetic but is still the best and most efficient system.
Nimrod factories produce solar water heaters for vertical (standing) or horizontal (lying down) installation or for hanging. The selection of sizes ranges from 80 liters to 300 liters.
Nimrod’s durable high-quality water heaters are designed to withstand harsh climatic conditions and ensure a continuous supply of hot water 24 hours a day, summer and winter, while saving considerable electricity and maintenance costs.
Nimrod’s solar water heaters are coated with enamel. This coating prevents the formation of rust that reduces the amount of hot water and shortens the life of the water heater.
With Nimrod’s solar panels, it is possible to optimally adjust to the customer’s needs and requirements. Thanks to the selection of different panels, different models can be connected in order to adapt the system to the roof conditions, the desired heat output, and the customer’s financial capacity.
At Nimrod, we have a large variety of panels from galvanized Schedule 40 pipes without solder seams, which are adapted to extreme climatic conditions (frost). Schedule pipes have a lifespan that is several times longer than that of ordinary pipes that are prone to rusting.
Nimrod is certified under the Water Quality Standard and the ISO 9001 Quality Management System standard.
Hundreds of thousands of water heating systems made by “Nimrod” that have been operating at full output for many years all over Israel are testimony to the great trust that the public has learned to place in the company’s products.
Recommendations for choosing a system for installation in extreme climatic conditions (frost). Schedule 40 piping, vertical installation (standing) on a flat roof / tiled roof / hanging.
(See additional recommendations in general installation / installer tips.)
Nimrod 300 liter water tank enamel coated + 2 Nimrod panels model PCS3
Schedule 40 piping with attaching wings with an area of 5 square meters and a total output of 13,010 kcal
Nimrod 200 liter water tank enamel coated + 2 Nimrod panels model PCS1 + PCS2
Schedule 40 piping with attaching wings with an area of 3.8 square meters and a total output of 8,828 kcal
Nimrod 150 liter water tank enamel coated + 1 Nimrod panel model PCS3
Schedule 40 piping with attaching wings with an area of 2.5 square meters and a total output of 6,505 kcal
Nimrod 120 liter water tank enamel coated + 1 Nimrod panel model PCS2
Schedule 40 piping with attaching wings with an area of 2.3 square meters and a total output of 5,515 kcal
Nimrod 80 liter water tank enamel coated + 1 Nimrod panel model PCS1
Schedule 40 piping with attaching wings with an area of 1.5 square meters and a total output of 3,313 kcal
It is mandatory to install a safety valve and a non-return valve in each water heater.
All Nimrod vertical (standing) solar water heaters are equipped with a heat accelerator.
All Nimrod water tanks and panels have a 4-year warranty.
The condition of the stand should be checked during installation.
It is recommended to install a circuit breaker and a cut-off valve near the water heater.